Changeslotto87K - ICP DAS USA MP-8 43 Series Function Reference

2.2.7 ChangeSlotTo87K

Description:
This function is used to dedicate serial control to the specified slot for the
control of 87K series. The serial bus in the PAC backplane is for mapping
through to COM1. For example, if you want to send or receive data from a
specified slot, you need to call this function first. Then you can use the other
series functions.
Syntax:
void ChangeSlotTo87K(unsigned char
Parameter:
slotNo :
Return Value:
None
Example:
unsigned char slot=1;
ChangeSlotTo87K(slot);
Remark:
http://www.icpdas.com
[Input] Specify the slot number.
MP-8x43 Function Reference V 1.0
++
[C ]
slotNo)
19