Reolink Go Plus Manual page 5

3. A red LED will be on and solid for a couple of seconds, then it will go out.
4. "Network connection succeeded". A blue LED will flash for a few seconds and
then go solid before going out, which means the camera has been successfully
connected to the network.
Note:
You may also run into the following situations:
No.
Voice Prompts
"SIM card cannot be
1
recognized"
"The SIM card is locked
2 with a PIN. Please
disable it"
Camera Status
Camera cannot
recognize this SIM
card.
Camera cannot
recognize this SIM
card.
Solutions
1. Check if the SIM card is
facing the reverse
direction.
2. Check if the SIM card is
not fully inserted and
insert it again.
Put the SIM card into your
mobile phone and disable
the PIN.