Status Light - Reolink Go Plus Manual

1 Micro SD Card Slot
2 SIM Card Slot
3 Reset Hole
4 Battery Status LED

Status Light

Note:
If the camera connects the network successfully,there will be no status LED light up
during idle mode.
Status Light
Red LED solid light up then starts to
flash
Red LED solid light up then flash
slowly about once every second
Red LED solid light up then flash
quickly about 3 times in 1s
Camera Status
Camera cannot recognize the SIM
card or there is PIN code of the SIM
card.
Camera cannot register the mobile
carrier network.
Data call failed or requires to input
the APN.