Advertisement
Quick Links
TrackMix Series G765
TrackMix Series G765 supports both 4G and 3G mobile networks, making it ideal
for locations where it is difficult to run network cables. Of course, you can also
connect it to the network using an Ethernet cable. Extensive options to meet any
requirement.
1. Specs
1
Infrared LEDs
2
Network Status LED
3
Lens
4
Microphone
5
Daylight Sensor
6
Spotlights
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Reolink TrackMix G765 Series
Summary of Contents for Reolink TrackMix G765 Series
- Page 1 TrackMix Series G765 TrackMix Series G765 supports both 4G and 3G mobile networks, making it ideal for locations where it is difficult to run network cables. Of course, you can also connect it to the network using an Ethernet cable. Extensive options to meet any requirement.
- Page 2 microSD Card Slot Reset Hole 2. Setup and Install SetuptheCamera What’s in the Box Note: The package content may vary and update with different version and platforms, please take the below information only for a reference. And the actual package content are subject to the latest information on the product selling page. TrackMix Series G765 TrackMix Series G765 1m Network...
- Page 3 Pack of Screws Mounting Template 4.5m Power Extension Power Adapter 12V/2A Cable Waterproof Lid Set up the Camera on the App There are two methods to do the initial setup of the camera: 1. With an Ethernet cable; 2. With a 4G SIM card. 1.
- Page 4 Otherwise, you can tap the icon in the top right corner and scan the QR code on the camera to add the camera.
- Page 5 Step 2. Create a login password for your camera. Then tap Next. Step 3. Name your camera. Then tap Next.
- Page 6 Step 4. Initialization finished! Tap Finish, and you can start live viewing now. 2. With a 4G SIM card Step 1. Activate the SIM card for the camera. Choose a Nano SIM card that supports WCDMA and FDD LTE. Some SIM cards have a PIN code, please use your smartphone to disable the ...
- Page 7 Step 2. Insert the SIM card into the camera. Remove the cover with the screwdriver. Insert a SIM-eject tool into the hole beside the SIM tray and push it in to pop open the tray. Place the SIM card into the tray, then insert the tray into the camera completely.
- Page 8 A blue LED will flash for a few seconds and then go solid before going out. You will hear a voice prompt “Network Connection Succeeded”, which means the camera has been successfully connected to the network. Note: You may also run into the following situations: Voice Prompts Camera Status Solutions...
- Page 9 APN settings to the settings” camera. Step 5. Add the camera to the Reolink App. Tap the icon in the top right corner to add the camera. Scan the QR code on the bottom of the camera. If the phone doesn't respond, ...
- Page 10 Create a login password and name your camera. Then tap Next. Read the note and then tap Finish to complete the initialization of your camera.
- Page 11 Step 1. Stick the mounting hole template on the wall and drill holes correspondingly. Step 2. Screw the mount base to the wall using the screws included in the package. Step 3. You may control the camera to pan and tilt via Reolink App or Client to adjust the camera's direction.
- Page 12 Step 1. Stick the mounting hole template on the ceiling and drill holes correspondingly. Step 2. Install the mount base to the wall using the screws included in the package. Step 3. Adjust the camera's direction by controlling the camera to pan and tilt via the Reolink App or Client.
- Page 13 Note: Use the drywall anchors included in the package if needed.
Need help?
Do you have a question about the TrackMix G765 Series and is the answer not in the manual?
Questions and answers