Table of Contents
Advertisement
Operation
1. Start the pump. See instruction manual 307906,
supplied.
2. To dispense fluid and adjust fluid flow from the
valve, start with the air supply turned off at the reg-
ulator (20). Hold the valve handle (1a) in the down
position to open the valve. Slowly open the regu-
lator until the desired fluid flow is obtained. Air
pressure of 30–40 psi (0.21–0.28 MPa, 2.1– 2.8
bar) is recommended to provide sufficient fluid flow
without splashing.
WARNING
To reduce the risk of splashing fluid in the eyes or
on the skin, always use the air regulator to control
the fluid flow from the valve.
To use the electronic meter, see instruction manual
308687, supplied, for detailed operating instructions.
Maintenance
Electronically Metered Models Only
For electronically metered models, see instruction
manual 308687, supplied.
12
1a
11
Fig. 1
20g
20
A
7634b
3
307637
Advertisement
Table of Contents
