Instructions For Use - Flex VLP 18 Original Operating Instructions

Instructions for use

WARNING!
Before working on the tool, remove the
battery.
Before initial operation
Unpack the device and accessories and
check that no parts are missing or were
damaged during transport.
NOTE
The batteries are not fully charged on
delivery. Prior to initial operation, fully
charge the batteries. Refer to the charger
operating manual.
Inserting/changing the battery
Push the charged battery into the device

until it engages fully.
To remove, press the release button (1.)

and pull out the battery (2.).
CAUTION!
When the device is not in use, protect the
battery contacts. Loose metal parts may
short-circuit the contacts; explosion and fire
hazard!
24
Battery charge level
Press the button to check the charge

level via the battery charge indicator
LEDs.
The indicator goes out after 5 seconds.
If one of the LEDs flashes, the battery must
be recharged. If none of the LEDs light up
after the button is pressed, the battery is
faulty and must be replaced.
Switching on and off
Press button (10) to switch on.

Press button (10) again to switch off.

VLP 18