Operating Instructions - Flex PE 14-3 125 Instruction Manual

PE 14-3 125
running, but not actually in use. This may
significantly decrease the exposure level over
the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).

Operating instructions

WARNING!
Before carrying out any work on the polisher,
always pull out the mains plug.
CAUTION!
The available mains voltage and the voltage
specifications on the rating plate must
be the same.
Before switching on the power tool
 Unpack the polisher and check that there
are no missing or damaged parts.
Attaching the auxiliary handle
The auxiliary handle can be attached
to improve handling of the polisher.
To do this, remove the handle cover
fastening screw from the side on which the
handle is to be attached.
When removing the handle, put back
the screw which was removed beforehand.
Switching on and off
Brief operation without engaged switch
rocker
 Press and hold down the switch.
 To switch off, release the switch.
Continuous operation with engaged
switch rocker
 Press and hold down switch (1.).
 To lock into position, hold down the
locking button and release the switch (2.).
 To switch off, briefly press and release
the switch.
9