Flex VLP 18 Original Operating Instructions page 18

Safety instructions
WARNING!
Read all safety notices and instructions.
Failure to comply with the safety notices and
instructions may result in electric shock, fire
and/or serious injuries . Keep all safety
notices and instructions in a safe place for
future reference.
This product is not intended to be used by

persons (including children) with physical,
sensory or mental disabilities or by
persons without the relevant experience
and/or knowledge.
The device may only be used by persons

who are familiar with its operation, have
been trained in safe handling of the device
and understand the dangers associated
with it. The device is not designed for use
by children.
Children must be supervised to ensure

that the device is not used incorrectly. Do
not allow unsupervised children to clean
the device or perform maintenance tasks
on it.
Keep your work area clean and well lit.

Cluttered benches and dark areas invite
accidents.
Do not operate power tools in an

explosive atmosphere, such as in the
presence of flammable liquids, gases, or
dust. Power tools create sparks which
may ignite dust or fumes.
Keep children and bystanders away

while operating a power tool. Distractions
can cause you to lose control.
Power tool plugs must match the outlet.

Never modify the plug in anyway. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or

grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is grounded.
Do not expose power tools to rain or wet

conditions. Water entering a power tool
will increase the risk of electric shock.
18
Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
When operating a power tool outdoors,

use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp

location is unavoidable, use a residual
current device (RCD) protected supply.
Use of a RCD reduces the risk of electric
shock.
Stay alert, watchwhat you are doing and

use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment.

Always wear eye protection. Protective
equipment such as a dust mask, nonskid
safety shoes, a hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
Prevent unintentional starting. Ensure the

switch is in the off-position before
connecting to a power source and/or
battery and picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energizing power tools that
have the switch on invites accidents.
Remove any adjusting key or wrench

before turning the power tool on. A wrench
or a key left attached to a rotating part of
the power tool may result in personal
injury.
Do not overreach. Keep proper footing

and balance at all times. This enables
better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing

or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
VLP 18