Midea MAP06S1JWT-B User Manual page 14

Exhaust hose and adaptors installation
Exhaust hose
Unit adaptor Air exhaust
passage
Connect the adaptor to the unit and the window
Before assembly
Window
Sliders
After assembly
1+2
1+2+3
1+2+3+4
1+4
Exhaust hose
assembly
Bolt
Bolt Bolt
Bolt Bolt Bolt
Bolt
1. The Exhaust Hose assembly installation
(window type)
Press the exhaust hose(or extended exhaust hose)
into the window slider adaptor and unit adaptor.
The pieces will clip together using the tabs on the
adapters.
NOTE: Please install the exhaust
hose assembly according to the
fittings in your kit.
2. Preparing the Adjustable Window Slider
Choose the window sliders according to the size of your
window. Some of the sliders may need to be cut to fit the
exact window size, make sure to cut the sliders carefully
if this is required.
Use bolts to fasten the window sliders once they are
adjusted to the proper length.
NOTE: Please base your window
slider installation on the
accessories in your kit and the
size of your window.
14