Advertisement
TILE OVER
INSTALLATION GUIDE:
1. Build Shower Area:
Determine waste location.
a. Determine location of the shower tray.
b. Mark the waste hole location.
c. Mark the required waste cut-out (142 x 142 mm) and cut.
d. Check tray fit.
e. Remove tray. Add additional support for the floor in the waste area if required.
f. Clean the floor in preparation for the installation of the tray.
Floor cut out
TOP VIEW
SHOWER TRAY
900 X 900
1000 X 1000
2. Preparation for Tray Installation:
a. Assemble the Stainless Steel Cap and Neoprene Washer to the Stainless Steel Tray Shell.
1598330-A02-A
Stainless Steel Trays
A
A
B
416 416
466 466
STAINLESS STEEL TRAY SHELL
NEOPRENE WASHER
STAINLESS STEEL CAP
March 2024
INSTALLATION INSTRUCTIONS
142mm
142mm
Page 4
Floor cut out
B
englefield.co.nz
Advertisement
