Selecting The Dialing Mode - Panasonic KX-TG2563S Operating Instructions Manual

Selecting the Dialing Mode
You can program the dialing mode using the handset near the base
unit.
If you have touch tone service, set to "Tone". tf rotary or pulse service is
used, set to "Pulse". Your phone comes from the factory set to "Tone".
Make sure the unit is in the standby mode initially.
1 PreSs[FUNCTIONIExlTICHj"
i_ ave direct°ryRinger volume
_:Yes
Press [] or [_ repeatedly until the arrow
_Prog_-am
points to
"Program".
YA _:Yes
3 Press FWD/FDIT
[_
(Yes
key).
[bSave DIRECT#
| Set flash time
i
[TA _:Yes
4 Press [] or [][] repeatedly until the arrow [Set line mode
points t o"Set
dial mode". _Set dial mode
[TA l'=Yes
Press
FWDIEDIT _ (Yes key).
I
Dial mode Tone
YA l_:Save
6
Press [] or _ to select "pulse" or [ Dial mode
"Tone".
:Pulse
YA P:Save
Dial mode
:Pulse
Press FWD/F:DIT [_] (Save key).
•A beep sounds.
.,To return to the standby mode, press
LFUNCTION/EXlT/CHJ.
,,You can exit the programming mode any time by pressing IFUNCTION/EXlT/CH].
• If the handset has lost communication with the base unit, 3 beeps sound and "No
link to base. Place on cradle and try again." isdisplayed.