Storing A Second Area Code - Panasonic KX- TC1721B Operating Instructions Manual

Storing a Second Area Code
You can program a second local area code. This area code does not
require a "1" before it when dialing. After storing this area code, the
display will show the 10 digits (3-digit area code plus 7-digit phone
number) after a call is received from that area code. Calls will be recorded
in the Caller List without "1". You cannot store a second area code unless
your area code is stored first (p. 18).
The TALK indicator light must be off before programming.
d Press (PROGRAM). Save AUTO# ?
o The TALK indicator flashes.
uon
V=Next A=Yes
2 Press SEARCH (V) (Next key) repeatedly ee are ae
until "2nd area code ?" is displayed.
V=Next A=Yes
o The current setting is displayed.
If no second area code has been Enter area code
programmed, "---" will be displayed.
o If 3 beeps sound, your area code has not
been stored. Store the code first (p. 18), and
start again from step 1.
4 Enter a second area code. 2nd area code
o If you enter a wrong number, press (CLEAR 7124
and enter the correct number. PROGRAM=Save
5 Press [PROGRAM] (Save key). Sn Aen rode
7124
o A beep sounds.
e The display will return to step 2.
To return to the stand-by mode, press
or wait for 60 seconds.
o To cancel during programming, press (EXIT). Start again from step 1.
To erase the second area code
Press (PROGRAM) & SEARCH (V) (Next key) 3 times =
= SEARCH (N (Yes key) = (CLEAR) => (PROGRAM) (Save key).
19