6.1 Offset / Gain Processing Settings
6.1 Offset / Gain Processing Settings
■
Overview of functions
● Offset value (added correction) and gain value (magnification correction) adjustments are
made to store processed data in the I/O area.
Digital output
data
● Offset value settings are used as a function (zero-point adjustment) to make offset error
adjustments between load devices.
If the analog conversion value is V0 when the digital set value is K-50, the analog conversion
data is corrected to 0 V based on K50 as an offset value.
-50
● Gain value settings are used as a function to adjust delicate scale errors between load
devices.
● Make offset and gain processing on a channel-by-channel basis.
■
Configuration
Name
Function setting
Offset / Gain
processing
Offset value setting
Gain value setting
6-2
Offset processing
(V)
(K)
Offset
processing
(V)
(K)
processing
Default
Not
execute
K0
K10,000 Set an offset value at the time of using the offset gain
Gain processing
Gain
Setting range and description
Select "Execute".
Set an offset value at the time of using the offset gain
processing function.
Setting range: -3,000 to +3,000 (specified with a signed
integer)
processing function.
Analog post-
processing data
(V)
(K)
(V)
Gain x 1.1
Gain x 0.9
(K)
WUME-FP7AOH-03