Wiring Of Terminal Block - Panasonic AFP7DA4H User Manual

3.1 Wiring of Terminal Block

3.1 Wiring of Terminal Block
■
Suitable solderless terminals/wires
M3 terminal screws are used for the terminal. The following suitable solderless terminals are
recommended for the wiring to the terminals
Fork type terminal
6 mm or less
■
Suitable solderless terminals
Manufacturer
J.S.T. Mfg Co., Ltd.
■
Suitable wires
Suitable wires
AWG22 to 14 (0.3 mm
■
Connection to the terminal block
Remove the terminal block before beginning the wiring operations.
To remove the terminal block, push downward the release lever located at the top of the
terminal block.
● Install the terminal block by inserting it all the way to its original position and pressing the
lock button on the bottom of the unit. Then confirm that the terminal block is securely
attached and cannot be removed.
3-2
3.2 mm or more
Tightening torque
) 0.5 to 0.6 N∙m
2 2
to 2.0 mm
Round type terminal
6 mm or less
Shape Part no.
Round type 1.25-MS3
Fork type 1.25-B3A
Round type 2-MS3
Fork type 2-N3A
Lock button
<Bottom of unit>
3.2 mm or more
Suitable wires
0.25 to 1.65 mm
1.04 to 2.63 mm
WUME-FP7AOH-03
2
2