Table of Contents
Advertisement
Control box repair cases
6.10 Router (-KE03)
Electrical schematic
Figure 6-15
Instructions
1. Label the cable(s) with the connected contact(s) or take a photo if sufficient.
2. Disconnect the cable(s) from the router.
3. Unscrew and remove the old router.
4. Install the new router.
5. Reconnect the cable(s) as before, according to the picture or label.
6. Restart the system and configure the exchanged device.
7. To configure the router follow the instructions in the SICHARGE UC Software manual in
chapter Router Configurations
(https://support.industry.siemens.com/cs/ww/en/view/109817021).
30
Electrical schematic - Router
SICHARGE UC Panto Kit Repair Instructions
Service Manual, 04/2024, A5E53652973-AA
Advertisement
Table of Contents
