Table of Contents
Advertisement
Electrical schematic
Figure 6-6
Instructions
1. Disassemble the PCB - Linux Board. Follow the instructions described in the chapter PCB -
Linux Board (-KE02) (Page 16).
2. Unscrew the HMI display.
3. Exchange the HMI display.
4. Reconnect the PCB - Linux Board to the new HMI display.
5. Screw and reconnect the PCB - Linux Board.
6. Restart the system and test the exchanged device.
SICHARGE UC Panto Kit Repair Instructions
Service Manual, 04/2024, A5E53652973-AA
Electrical schematic - HMI
Control box repair cases
6.4 HMI (-SZ01)
21
Advertisement
Table of Contents
