Matrox Morphis Evo Installation And Hardware Reference page 38

38 Chapter 2: Hardware installation
2. To insert a wire into a wire-terminal, first press down on the orange flange with a
small tool or pen, as shown in the illustration below.
Insert wire into
wire-terminal
Wire-terminal
Matrox recommends that you purchase the following screwdriver from Phoenix
Contact inc. to press down on the flange:
Tool
Screwdriver
Manufacturer
Order number
3. Insert the wire tip into the wire-terminal before releasing the orange flange. The
wire is now attached to the wire-terminal.
Press down on
oran e flange g
with tip of pen
Terminal block
connector
Description
Phillips head screwdriver, blade thickness 0.4 mm,
blade width 2 mm.
Phoenix Contact
1205202
Bracket