Matrox Morphis Evo Installation And Hardware Reference page 31

Installing one or two Matrox Morphis Evo I/O modules
Connecting your first Matrox Morphis Evo I/O module
to the Matrox Morphis Evo main board
I/O expansion connector
Note that if you were planning on installing a second I/O module,
a flat ribbon cable would be hanging loose from internal
expansion connector 1 of the first I/O module.
Matrox Morphis Evo I/O module
Matrox Morphis Evo board
31
Internal
expansion
connector 1
Internal
expansion
connector 0
Red wire