Table of Contents
Advertisement
4.5.
Connecting to Power Supply
DANGER
Electric shock caused by short-circuit
The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other voltage or
frequency to the device.
This device falls under IEC protection class I. Make sure that the device is always electrically connected to the
ground (earth).
Before connecting the device to the socket-outlet:
•
•
Make sure that the power supply matches the input voltage specified on the information label on the
device.
•
•
Make sure that the socket-outlet has ground (earth) connection.
Connect the device to the socket-outlet with the power plug.
5.
Operation
5.1.
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as an audio input selector. It can be installed only indoors. This
device is not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency match
the input voltage, current and frequency specified on the information label on the device.
5.2.
Switching ON/OFF
The device has a power switch.
•
•
Press the push button switch (01) in ON position to switch on the device. The backlight turns on.
•
•
Press the push button switch (01) in OFF position to switch off the device. The backlight turns off.
Make sure that the device is switched off from the push button switch (01) when the device is not in use.
c
12
SC-5.2 Source Control
Product code: D1540
Advertisement
Table of Contents
Need help?
Do you have a question about the SC-5.2 Source Control and is the answer not in the manual?