Please consider that damages caused by manual modifications to the system are not subject to warranty. This system contains no user-serviceable parts. Refer servicing to qualified technicians only. Ordercode: D1260...
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc. You endanger your own safety and the safety of others! Improper installation can cause serious injuries and damage of property ! Ordercode: D1260...
After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement of which the obligation is resulting. Ordercode: D1260...
Booth monitor & balanced master output • Microphone input • 2 analog inputs (not supported by the virtual DJ LE software) • 4 in, 4 out audio interface • Including Virtual DJ LE Overview Fig. 01 Deck A Mixer Deck B Ordercode: D1260...
01) Connect the Kontrol D4i to your mixer/amplifier using the proper cables. 02) Connect the supplied power adapter. CAUTION: Be sure that the mixer/amplifier’s power is off, when connecting the cables. Turn on the Kontrol D4i before you turn on your mixer/amplifier. Ordercode: D1260...
Pushing and holding the shift (47) button while tapping this button allows you to set up a deck as a master for sync play. 12) Parameter 1control The Parameter 1 and 2 controls allow you to adjust effect parameters. Note that not all effects require two parameter controls. Ordercode: D1260...
Page 11
This button allows you to select or deselect scratch mode for the jogwheel. If the scratch mode is not selected, the jogwheel is in jog mode. 28) Play button This button allows you to toggle between pause mode and playback mode. Ordercode: D1260...
While pushing and holding the shift (47) button and tapping this button allows you to select the Record panel (see page 22, “1. Browser/Sampler/Effects/Record”). 46) Back button This button in combination with the track select (43) encoder allows you to navigate the browser panels. See page 14: “Selecting folders” and “Selecting tracks” Ordercode: D1260...
Is used to adjust your headphone volume level. 57) Headphones output (6,3 mm) You can connect a pair of headphones with a minimum impedance of 32 Ohm to this stereo 1/4” jack. The jack should be wired as Tip=left, Ring=right and sleeve=ground. Ordercode: D1260...
3 (67) input. 69) Channel 4 input level control Use to adjust the level of the channel 4 (64) input. 70) Channel 3 input level control Use to adjust the level of the channel 3 (67) input. Ordercode: D1260...
• your hot cue point will be stored. • The stored hot cue point will be indicated in the Waveform display as shown in figure 6 on page 15. Push the play (28) button to continue playback. • Ordercode: D1260...
BPM. The faster you turn the wheel, the more the BPM changes. The adjustment range is +/- 20%. When you release the jogwheel (09), the track will return to the BPM set with the pitch control fader • (05). Ordercode: D1260...
Select a memory space in which you want to store your new sample, by using the sample select up • (20) and sample select down (21) buttons. Push the sample play (19) button to toggle playback/pause of the sample. • Ordercode: D1260...
Minimum: Mac OS X v10.5 Leopard on Intel processor platform • • Recommended: Mac OS X v10.6.x Snow Leopard on Intel processor platform Apple® Mac OS X 10.4.x Tiger or older are not supported • Motorola® (PowerBook® G4) processor platform or older are not supported • Ordercode: D1260...
CD. 02) The welcome screen will pop up. Press Next when finished reading the screen. 03) Now the readme file as shown below will pop up. Check the “I accept” checkbox and click Next. Ordercode: D1260...
Page 20
Core Kontrol D4i 04) The Setup screen will pop up. Click Typical. 05) The Installation screen will pop up. Click Install. Ordercode: D1260...
Page 21
Core Kontrol D4i 06) If the installation is finished the screen below will pop up. Press the finish button to complete the installation. Ordercode: D1260...
04) Virtual DJ will check for the currently latest version (this can be disabled in the configuration section). The Virtual DJ user interface will appear. 05) Click the Config button (upper right). The following screen will pop up. Ordercode: D1260...
Page 23
Make sure the Kontrol D4i is connected with your computer’s USB port and is switched on before setting up your soundcards, otherwise you won’t be able to acces your Kontrol D4i’s built in soundcards. For more possibilities, we suggest reading the Virtual DJ Quick guide. You can download the Virtual DJ Quick guide from: http://www.virtualdj.com/wiki/PDFManuals.html Ordercode: D1260...
07) Rhythm window This window tracks the waveform of each song loaded or playing on the decks. This area also features Computer Beat Grid (CBG) used for visual mixing and beat matching. Ordercode: D1260...
Browser panels 08) File System/Folder Structure 09) File/Search Results For more information on the Virtual DJ software, we suggest checking the Support Section http://www.virtualdj.com/ . Here you can find manuals, forums etc. Sampler panels Effects panels Record panels Ordercode: D1260...
Make sure that to the c:\Users\{Username}\My Documents\VirtualDJ\Devices contains ME800.xml controller. Window Windows XP: Make sure that c:\Documents and Settings\{Username}\My Documents\VirtualDJ\Devices contains ME800.xml Mac OS X: Make sure that ./Users/{Username}/Documents/VirtualDJ/Devices contains ME800.xml File can be downloaded from http://www.highlite.nl Ordercode: D1260...
Page 27
Analog input The switches where Move the switches from on to off. Now the software will switches 3 and in on position while recognize the switch. 4 are not switching the functioning device off. with Virtual DJ Pro software. Ordercode: D1260...
1 x Headphone, 6,3mm Jack Power-supply: External adapter 7,5V DC Power consumption: 2000mA Dimensions: 334 x 475 x 70 mm (LxWxH) Weight: 2,65 Kg Design and product specifications are subject to change without prior notice. Website: www.Dap-audio.info Email: service@highlite.nl Ordercode: D1260...
System real time Clock Commands Local Aux Messages ON/OFF All Notes OFF X Active Sense X Reset O:YES Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO X:NO Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO Ordercode: D1260...
Page 30
Note number Function track encoder (push) ch. 1 cue ch. 2 cue ch. 3 cue ch. 4 cue ch. 1 crossfader assign L ch. 1 crossfader assign R ch. 2 crossfader assign L ch. 2 crossfader assign R Ordercode: D1260...
Page 31
2 gain ch. 2 hi ch. 2 mid ch. 2 low ch. 2 filter ch. 2 fader ch. 3 gain ch. 3 hi ch. 3 mid ch. 3 low ch. 3 filter ch. 3 fader ch. 4 gain Ordercode: D1260...
Page 32
MIDI Channel 6 Control change number Function touch sens. A touch sens. B *3: pitch bend channels Channel number Function pitch fader deck 1 pitch fader deck 2 pitch fader deck 3 pitch fader deck 4 crossfader Ordercode: D1260...