REPLACING UV-C LAMP
1. The
indicator will glow red when it is time to
replace the UV-C lamp.
2. Remove HEPA filter drum (Fig. A), and use a
screwdriver to remove the 4 screws securing the UV
housing (Fig. I).
3. Gently remove the UV housing (Fig. J).
4. Disconnect the UV-C lamp from the socket within
the purifier (Fig. K).
Note: Upon replacement of the UV-C emitter please dispose of at your local WEEE collection facility.
Fig. I
Fig. K
5. Your replacement UV-C lamp (on page 14) will plug
directly into the same socket (Fig. L).
6. Replace the UV housing and use a screwdriver to
tighten the fastening screws.
7. Once the purifier is powered-on, hold the Reset
button until the
Fig. J
Fig. L
indicator turns white.
17