Replacing Uv Bulb - LEITZ TruSens Z-3000 Owner's Manual

REPLACING UV BULB

1. The indicator will glow red when it is time to
replace the UV bulb.
2. Remove HEPA filter drum (Fig. A), and use a
screwdriver to remove the 4 screws securing the UV
housing (Fig. I).
3. Gently remove the UV housing (Fig. J).
4. Disconnect the UV bulb from the socket within the
purifier (Fig. K).
Note: Upon replacement of the UV-C emitter please dispose of at your local WEEE collection facility.
Fig. I
Fig. K
5. Your replacement UV bulb (on page 12) will plug
directly into the same socket (Fig. L).
6. Replace the UV housing and use a screwdriver to
tighten the fastening screws.
7. Once the purifier is powered-on, hold the Reset
button until the
Fig. J
Fig. L
indicator turns white.
15