Electromagnetic Compatibility (Emc) - Leica iCON gps 70 User Manual

Hide thumbs Also See for iCON gps 70:
Table of Contents

Advertisement

1.6
Description
14
For the AC/DC power supply and the battery charger:
WARNING
Unauthorised opening of the product
Either of the following actions may cause you to receive an electric shock:
Touching live components
Using the product after incorrect attempts were made to carry out repairs.
Precautions:
Do not open the product!
Only authorised Leica Geosystems Service Centres are entitled to repair
these products.
WARNING
If the product is improperly disposed of, the following can happen:
If polymer parts are burnt, poisonous gases are produced which may
impair health.
If batteries are damaged or are heated strongly, they can explode and
cause poisoning, burning, corrosion or environmental contamination.
By disposing of the product irresponsibly you may enable unauthorised
persons to use it in contravention of the regulations, exposing themselves
and third parties to the risk of severe injury and rendering the environ-
ment liable to contamination.
The product includes parts of Beryllium inside. Any modification of some
internal parts can release dust or fragments, creating health hazard.
Precautions:
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with
the national regulations in force in your country.
Always prevent access to the product by unauthorised
personnel.
Product-specific treatment and waste management information can be
received from your Leica Geosystems distributor.
WARNING
Improperly repaired equipment
Risk of injuries to users and equipment destruction due to lack of repair
knowledge.
Precautions:
Only authorised Leica Geosystems Service Centres are entitled to repair
these products.

Electromagnetic Compatibility (EMC)

The term Electromagnetic Compatibility is taken to mean the capability of
the product to function smoothly in an environment where electromagnetic
radiation and electrostatic discharges are present, and without causing elec-
tromagnetic disturbances to other equipment.
Safety Directions

Advertisement

Table of Contents
loading

Table of Contents