Table of Contents
Advertisement
The following are the actions to trigger the reports:
Table 6 – Lifeline Report Trigger Table
Report Command
Battery Report
Configuration Report
Notification Report (Access Control)
Notification Report (Power
Management)
Door Lock Operation Report
Door Lock Configuration Report
Device Reset Locally Notification
User Code Report
Extended User Code Report
User Code Keypad Mode Report
Master Code Report
RF Trigger
Any RF Lock Operation when lock is
under the battery thresholds
Configuration Set
Any RF Lock Operation
Any RF Lock Operation when lock is
under the battery thresholds
Door Lock Configuration Set
Add/Delete User Code via User Code Set
Command
Add/Delete User Code via Extended
User Code Set Command
User Code Keypad Mode Set
Master Code Set
22
Manual Trigger
Any manual/keypad Lock Operation
when lock is under the battery
thresholds or Power Cycle Lock
Change Lock Settings via Keypad
Manual or Keypad Unlock/Lock
Any manual/keypad Lock Operation
when lock is under the battery
thresholds or Power Cycle Lock
Manual or Keypad Unlock/Lock
Enable/Disable Auto-Relock Feature via
Keypad
HW Factory Reset
Add/Delete User Code via Keypad from
Slots 1-250
Add/Delete User Code via Keypad from
Slots 251-500
Enable/Disable Vacation Mode or Privacy
Mode (refer to Installation Manual)
Update/Modify Master Code via Keypad
Advertisement
Table of Contents
