Command Class Security, Version 1; Command Class Security 2, Version 1; Command Class Device Reset Locally, Version 1 - Yale real living Z-Wave Plus YRD622-NN-ZW3 Installation Manual

Table 1 - First 2 Digits of Product ID
[0x8004/0x8002]-ZW2
[0x8004/0x8002]-ZW3
[0x8109/0x810A]-ZW2
[0x8109/0x810A]-ZW3
[0x8103]-ZW2
[0x8103]-ZW3
[0x8104]-ZW2
[0x8104]-ZW3
[0x8113]-ZW2
[0x8113]-ZW3

Command Class Security, Version 1

This command class has been implemented per the Z-Wave

Command Class Security 2, Version 1

This command class has been implemented per the Z-Wave

Command Class Device Reset Locally, Version 1*

* This command class requires security.
The Yale door locks covered in this guide can be reset to their factory default
settings by manually resetting the lock or by BLE command via app for BLE locks
(by following the procedure outlined in the specific lock's manual).
Upon factory reset, all Z-Wave
erased from the lock (including the master code), and all configurable settings are
reset to default values, except for the language setting. A factory reset leaves the
lock in a completely unsecure state (waiting for master code to be set), so care
should be taken if using the configuration parameter to perform a remote reset.
However, if the DUT is unenrolled/excluded from the network through the device
menu mode, then the user code database and configuration settings will not be
reset to the defaults.
Z-Wave™
Type Platform
0 0 0 0 0
0 1 0 0 0
0 0 0 0 1
0 1 0 0 1
0 0 0 1 0
0 1 0 1 0
0 0 0 0 0
0 1 0 0 0
0 0 0 1 1
0 1 0 1 1
network settings are cleared, all the user codes are
™
11
Hex Value
1 1 0 0x06
1 1 0 0x46
1 0 1 0x0D
1 0 1 0x4D
0 1 0 0x12
0 1 0 0x52
1 0 1 0x05
1 0 1 0x45
1 0 1 0x1D
1 0 1 0x5D
™ Specification.
™ Specification.