Command Class Door Lock, Version 4; Command Class Door Lock Logging, Version 1; Command Class Schedule Entry Lock, Version 3; Command Class User Code, Version 2 - Yale real living Z-Wave Plus YRD622-NN-ZW3 Installation Manual

Command Class Door Lock, Version 4*

* This command class requires security.
Yale Z-Wave Plus ™ locks support three door lock modes: Door Secured (0xFF),
Door Unsecured (0x00), and Door Unsecured with timeout (0x01). When Auto
Relock is enabled, the lock will automatically relock after all unlock events. Yale Z-
Wave Plus ™ locks do not support any of the "Door Unsecured for outside Door
Handles" (0x20, 0x21) or "Door Unsecured for inside Door Handles" (0x10, 0x11)
modes.

Command Class Door Lock Logging, Version 1*

* This command class requires security.
This command class has been implemented per the Z-Wave ™ Specification.

Command Class Schedule Entry Lock, Version 3*

* This command class requires security.
Yale locks support Year Day Schedule types and Daily Repeating Schedule types.
Yale locks allow the controller to apply multiple schedules to a single user. Each
user has 1 Year Day Schedule slot (Slot ID 1) and 7 Daily Repeating slots (Slot IDs
1 – 7). If user scheduling is used in the lock, then the controller MUST set the
lock's time using the Time Parameters command class.

Command Class User Code, Version 2*

* This command class requires security.
Versions 1 and 2 of this command class can address user code slots 1 through 250
via the User Code Set/Get/Report commands. Version 2 of this command class also
includes extended versions of each of these commands, used to address the
extended range of users.
14