Table of Contents
Advertisement
Tap "+" , a pop-up window appears. Select the checkbox before the
software name and tap "SAVE" , the software will be displayed in the
Common software list. Next time you want to update it, just go to
"Common Software" .
6.5 Settings
This module allows you to manage diagnostic reports, VCI devices,
configure wireless printer and print information and add favorite
website etc.
6.5.1 General
6.5.1.1 Units of Measurement
It is designed to set the measurement unit. Metric System and
English System are available.
6.5.1.2 Expiration Reminder
All pre-installed diagnostic software is free to use for 30 days. Once it
expires, it will be locked automatically and the system will prompt you
to activate your VCI if the expiration reminder is ON.
6.5.1.3 Diagnostic Software Auto Update
This option is designed to turn on/off the automatic diagnostic
software update function. If set as ON, the system will automatically
update the available diagnostic software when the tablet has a
network connection and a newer version is detected.
6.5.1.4 Automatic detection once connected
This option enables you to determine whether to start an automatic
VIN detection once the handset is properly connected to the vehicle's
DLC.
42
Fig. 6-13
User Manual
6.5.1.5 Auto Generate Health Report once connected
Once it is set as ON, the system will automatically output a health
report once the AutoDetect diagnostic session is finished.
6.5.1.6 Diagnostic Application Auto Update
This option is used to set whether to update the available diagnostic
application automatically when the tablet has stable Wi-Fi signal.
6.5.2 VCI Management
If several VCI devices are activated on this tool, a list of VCI devices
will be displayed on the screen. If your tool extends to support heavy-
duty trucks, you need to switch to the corresponding VCI module
before diagnosing it.
Once you choose the device that belongs to other account, you have
to log out, and then input the right account to continue.
• If you use the another VCI to test a vehicle, select the desired
checkbox and tap "Pair" to pair it with the tablet.
• If the current VCI comes across communication failure, tap
MDMAXPROHD
Fig. 6-14
www.matcotools.com
877-853-3738
Advertisement
Table of Contents
