Table of Contents
Advertisement
Simply follow the on-screen instructions and make appropriate
selections to complete the test. Each time when an operation is
successfully executed, "Completed" displays.
5.4 Maintenance Reset
I n a d d i t i o n t o a m a z i n g & p o w e r f u l d i a g n o s t i c f u n c t i o n ,
MAXIMUSPROHD also features various service functions. The most
commonly performed service functions contain:
• Oil Reset Service
• Electronic Parking Brake Reset
• Steering Angle Calibration
• ABS Bleeding
• TPMS (Tire Pressure Monitor System) Reset
• Gear Learning
• IMMO Service
• Injector Coding
• Battery Maintenance System
• Diesel Particulate Filter (DPF) Regeneration
30
User Manual
• Electronic Throttle Position Reset
There are two methods to reset service lamp: Manual reset or Auto
reset. Auto reset follows the principle of sending command from the
tool to vehicle's ECU to do resetting. While using manual reset, users
just follow the on-screen instructions to select appropriate execution
options, enter correct data or values, and perform necessary actions,
the system will guide you through the complete performance for
various service operations.
Select "Reset"
Select the desired reset
item (e.g. oil lamp reset
etc.)
Figure 5-38
5.4.1 Oil Reset Service
This function allows you to perform reset for the engine oil life system,
which calculates an optimal oil life change interval depending on the
vehicle driving conditions and climate.
This function can be performed in the following cases:
1. If the service lamp is on, you must provide service for the car. After
service, you need to reset the driving mileage or driving time so
that the service lamp turns off and the system enables the new
service cycle.
MDMAXPROHD
Follow the instructions
on the screen to operate
Select the service mode
(The available mode varies
from vehicle to vehicle)
Select the car brand
www.matcotools.com
877-853-3738
Advertisement
Table of Contents
