Table of Contents
Advertisement
No.
Name & Descriptions
DB-15 Diagnostic Connector -- To connect the diagnostic
1
cable.
2
Touch Screen
DC-IN Port
*Warning: The VCI dongle obtains power through the
vehicle's DLC (Data Link Connector) via the diagnostic
cable. Do NOT connect the DC-IN port to an external
DC power supply if the VCI dongle can be powered up
normally.
3
If the pin of the DLC is damaged or the DLC has
insufficient power, connect the DC-IN port to an external
DC power supply.
No responsibility can be assumed for any damage or
loss caused as a result of not strictly following the above
method.
Data I/O Port -- To connect it to the tablet to perform
4
diagnosis via the data cable.
5
LAN/WAN Port -- Reserved for other purposes.
2.4 Accessory Checklist
Common accessories are same, but for different destinations, the
accessories may vary. The following accessory items are only for
reference. Please consult from the Matco Distributor or check the
package list supplied with this tool together.
www.matcotools.com
877-853-3738
User Manual
No.
Name
Qt.
MAXIMUSPROHD
1
1
Tablet
2
VCI Dongle
1
3
Power Adapter
1
MDMAXPROHD
Picture
(A tablet for showing test results.)
(A device for accessing vehicle
data.)
(To supply power to the tablet
through connection to AC outlet.)
5
Advertisement
Table of Contents
