Table of Contents
Advertisement
Unselect: Tap it to deselect all data stream items.
OK: Tap it to confirm and jump to the next step.
After selecting the desired items, tap "OK" to enter the data stream
reading page.
*Notes:
1. If the value of the data stream item is out of the range of the
standard (reference) value, the whole line will display in red. If it
complies with the reference value, it displays in blue (normal mode).
2. The indicator 1/X shown on the bottom of the screen stands for
the current page/total page number. Swipe the screen from the
right/left to advance/return to the next/previous page.
There are 3 types of display modes available for data viewing, allowing
you to view various types of parameters in the most suitable way.
• Value – this is the default mode which displays the parameters in
texts and shows in list format.
• Graph – displays the parameters in waveform graphs.
• Combine – this option is mostly used in graph merge status for data
comparison. In this case, different items are marked in different
www.matcotools.com
877-853-3738
User Manual
colors.
On-screen Buttons:
: Tap it to view the waveform graph of the current data stream
item.
• Min/Max: Tap "Min/Max" to define the maximum/minimum
value. Once the value goes beyond the specified value, the
system will alarm.
• Customize: If desired, you can customize to show only those
PIDs you are interested in viewing. Tap "Customize" to add/
change other data stream items.
*Note: The real time (Live Data) vehicle operating information
(values/status) that the on-board computer supplies to the tool for
each sensor, actuator, switch, etc. is called Parameter Identification
Data (IPD).
Graph: Tap it to view the waveform.
MDMAXPROHD
27
Advertisement
Table of Contents
