Table of Contents
Advertisement
serve as valuable information to help you in troubleshooting of vehicle
problems. All diagnostic records can be replayed from "Toolbox" ->
"Saved reports" -> "Recorded Data" .
*Note: The saved file follows the naming rule: It begins with vehicle
type, and then the record starting time and ends with .x431 (To
differentiate between files, please configure the accurate system
time).
Help: Tap to view the help information.
Sample DS: This item enables you to customize the standard range of
live data stream items and save it as DS sample file. Each time you
run the data stream items, you can call out the corresponding sample
data to overwrite the current standard range.
Tap it to start recording the sample data (*Only data stream items
with units will be recorded), and the screen displays as below:
Once recording is complete, tap
revision screen.
www.matcotools.com
877-853-3738
to stop it and navigate to the data
User Manual
Tap the Min./Max. value to change it. After modifying all desired
items, tap "Save" to save it as an sample DS file. All DS files are
stored under the "Data Samples" file of "Save Report" in "Toolbox" .
E. Actuation Test
This option is used to access vehicle-specific subsystem and
component tests. Available test vary by vehicle manufacturer, year,
and model. During the actuation test, the MAXIMUSPROHD tablet
outputs commands to the ECU in order to drive the actuators, and
then determines the integrity of the system or parts by reading the
ECU data, or by monitoring the operation of the actuators, such as
switching a injector between two operating states.
On the test function selection screen, tap "Actuation Test" , the system
will display as follows:
MDMAXPROHD
29
Advertisement
Table of Contents
