Rear Panel; Dc In Terminal; Phones Jack - Yamaha GW33 Owner's Manual

REAR PANEL

POWER
ON OFF DC IN
q w
q POWER ON/OFF Switch
w DC IN Terminal
For connection to the PA-3 AC adaptor (or another
adaptor recommended by Yamaha). (Never use the
PA-3B.) Wrap the adaptor cord firmly around the cable
clip as shown, to prevent accidental unplugging of the
power cord during use.
AC adaptor
e INPUT Jack
For connection of an instrument (guitar, bass, etc.). (See
page 10 for more information on input/output connec-
tions.)
r INSERT SEND and RETURN Jacks
For connection of an external effect device or devices.
Use the SEND jack to output the signal from the GW33,
and use RETURN to input the signal from the external
effect device(s).
6
INSERT
INPUT SEND RETURN
e r
Cable clip
D C I
N
OUTPUT
PHONES
R L / MONO CONTROLLER
t y
1 2 1 2
t L/MONO and R OUTPUT Jacks
1 2
1 2
1 2 1 2
For stereo or mono output of the instrument and metro-
1 2 1 2
1 2 1 2
nome sound. Connect both of these to the corresponding
1 2
1 2 1 2
left and right channels of your stereo amplification system
1 2 1 2
1 2 1 2
to take full advantage of the stereo effects of the GW33.
1 2 1 2
For mono operation, connect your system only to the L/
1 2 1 2
1 2 1 2
MONO jack; this provides a mono mix of the instrument
1 2 1 2
1 2 1 2
sound when the R OUTPUT jack is not connected.
1 2 1 2
1 2 1 2
1 2 1 2
y PHONES Jack
1 2 1 2
1 2 1 2
For stereo output of the guitar/effect and metronome
1 2 1 2
1 2 1 2
sound to a set of stereo headphones.
1 2 1 2
1 2 1 2
1 2 1 2
u FOOT CONTROLLER Jack
1 2 1 2
1 2 1 2
For connection of an optional foot controller (use ONLY
1 2 1 2
the Yamaha FC7), for controlling the volume or the Pedal
1 2 1 2
1 2 1 2
Wah effect. (See page 30.)
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2
FOOT
u