Guided Tour - Yamaha GW33 Owner's Manual

GUIDED TOUR

When using your GW33 for the first time, read through this short section of the
manual. It guides you step-by-step in all basic operations: setting the instrument
up, connecting it properly to other equipment, and playing the effect programs.
SETTING UP AND PLAYING YOUR GW33
Plug into a
suitable AC
outlet
PA-3
power adaptor
Use only this
adaptor or
another Yamaha
recommended
adaptor.
POWER
ON OFF DC IN
External effect unit
OUT
10
Once you've taken your GW33 out of the box and are ready to use it, you'll have to make a few
connections and follow some simple instructions on setting it up.
Wrap the adaptor cord around the
cable clip to prevent accidintal
unplugging.
D C I
INSERT
INPUT SEND RETURN
Guitar amplifier
(left channel)
IN
* When using a single guitar amp, connect to
the L/MONO OUTPUT jack.
Electric guitar
N
OUTPUT FOOT
PHONES
CONTROLLER
R L / MONO
Guitar amplifier
(right channel)
Optional FC7
Foot Controller
(for Volume pedal
and Pedal Wah
control).
Headphones
* Signals are output through
the OUTPUT jacks, even
when headphones are
connected.
* Adjust the headphone
volume with the Total Level
parameter (see page 31).