Swapping One Effect Program With Another; Restoring Factory-Set Effect Programs - Yamaha GW33 Owner's Manual

Swapping One Effect Program with Another

The Swap operation simply exchanges two selected
programs, swapping the data of one program number for
that of the other.
Before Swap:
BANK # 1
PROGRAM # 1
A
After Swap:
BANK # 1
PROGRAM # 1
B
NOTE Effect
programs cannot be
"cross-swapped"
between memory
locations. In other
words, User programs
can only be swapped
with other User
program numbers, and Preset programs can only be
swapped with other Preset program numbers.

Restoring Factory-set Effect Programs

If you've erased one or more of the effect programs by
replacing it with one of your own creation, you can use
this function to restore the original program or pro-
grams.
NOTE Remember that restoring a Preset program
will irretrievably erase whatever effect that you
created and saved to the corresponding effect
program number. For this reason, you should always
make a written record of the settings you make (using
a copy of the Blank Effect Parameter Chart on page
38), so that you can reprogram the effect later if
necessary.
BANK # 1
PROGRAM # 2
B
BANK # 1
PROGRAM # 2
A
Only
User User
Programs Programs
Only
Preset Preset
Programs Programs
1
1 1
OPERATION
1
1
1 1
1
With the Play mode enabled, select one of the effect
1
1 1
programs to be swapped.
1
1
1 1
1
1
2
Press the s button. (The SWAP lamp
1 1
1
1
1 1 lights, and the BANK/MEMORY indicator
1
1
flashes.)
1 1
1
1
1 1
1
SWAP/
1
1 1
WRITE
1
1
1 1
1 1
1 1
3
Use Parameter Dial A to select the other program
1 1
1 1
number.
1 1
1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
4
To actually swap the program to the destination
1 1
1 1
number, press the y button. To cancel the
1 1
operation, press the n button.
1 1
1 1
1 1
1 1
1 1 ••••••
• •
• •
• •
• •
1 1
• •
•••••
• •
• •
1 1 • •
• •
• •
••••••
1 1
1
1 1
1 1
OPERATION
1 1
1
Simultaneously hold down the p button
1 1
1
1 1
and turn the power on.
1 1
1 1
1 1
2
Select the program number of the effect you
1 1
1 1
wish to restore. Do this using Parameter Dial A,
1 1
1 1
bringing up the desired number to the BANK/
1
1 1
MEMORY indicator.
1 1
1 1
1 1
NOTE Effect programs can be restored to their
1 1
1 1
original program number location.
1 1
1
1 1
3
Press the y button to restore the selected
1 1
1 1
effect program, or press the n button to
1 1
1 1
cancel and return to normal operation.
1 1
1 1
1 1
4
Repeat steps #2 and #3 above to restore other
1 1
1 1
programs, if desired.
1 1
1
BANK MEMORY
•••••••
A
BANK MEMORY
•••••••
YES
• • PAR
• •
•••••••••••••
• •
CHE
NO
33