Saving An Effect Program - Yamaha GW33 Owner's Manual

Now that you've created your own original effect pro-
gram, you will want to save the settings to a program
number, so that you can recall your new effect program in
the future. (For more information on saving effect pro-
grams and other matters relating to memory, see the
SYSTEM OVERVIEW section on page 7.)
1
If you've continued from the last section and have
new settings you want to save, press the
s button.
SWAP/
WRITE
The SWAP/WRITE lamp lights and the program
number in the BANK/MEMORY indicator flashes
to indicate that the GW33 is ready to write the
settings to memory at the selected program number.
If you want to save the program to the current
number, skip to step #3. If you want to select a
different program for saving the new program, go to
the next step.
NOTE Edited programs can be saved to the User
effect programs, in banks 1 – 5. Banks 6 – 0 are
reserved for the Preset effect programs, and cannot
be used to save edited programs.
When you've edited one of the Preset
NOTE
programs (61 – 05) and try to save it, "—" appears in
the BANK/MEMORY indicator until you select one of
the User program numbers (11 – 55).
This concludes your short tour of the important functions of the GW33. To find out
more about how to best use your GW33, look through the Reference section and read
about some of the functions that interest you.

Saving an Effect Program

SWAP/
WRITE
BANK MEMORY
•••••••
1
2
1 1
If desired, select the destination User program
1
1
1 1
number (11 – 55) by using Parameter Dial A.
1
1 1
1
1
1 1
1
A
1
1 1
1
1
1 1
1
1
1 1
1
1
1 1
1
1
1 1
Keep in mind that the programs that you edit can
1
1
only be saved to one of the User program numbers,
1 1
1 1
and not to the Preset program numbers.
1 1
1 1
1 1
3
To actually save the new settings, press the
1 1
1
y button. (Operation returns to the Edit
1 1
1 1
mode.)
1 1
1 1
1 1
1 1
•••••• YES
1 1
• •
• •
• •
• •
1 1
• •
•••••
• •
• •
• •
1 1
• •
• •
••••••
1 1
1 1
1 1
1 1
To cancel the operation without saving, press the
1 1
1 1
n button.
1 1
1 1
1 1
Pressing n returns to the program that you've
1 1
1 1
been editing. The settings are saved temporarily, and
1 1
1 1
you can continue editing the program.
1 1
1 1
1 1
1 1
1 1
••••••
• •
• •
• •
1 1
• •
• •
•••••
• •
1 1
• •
• •
• •
1 1 • •
••••••
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1
BANK MEMORY
•••••••
PAR
• •
• •
•••••••••••••
• •
CHE
NO
YES
PARAM
• •
• •
••••••••••••••••••••••
• •
CHECK
NO
15