3. Use PARAMETER INCREMENT/DECREMENT keys
to set desired value of the selected parameter.
NOTE: A description of each parameter and its effect
will be given in the PROGRAMMABLE PARA-
METERS section, beginning on page 10.
STORE: SAVING EDITED PROGRAMS
Once you've edited parameters on a preset program,
those changes will remain in effect only until you select
(RECALL) another program. The STORE function,
however, allows you to save the edited program in any
one of the user memory locations — from 31 to
90 — from which it can then be recalled at any time.
1. Select and edit a program as described above.
2. Use the MEMORY INCREMENT/DECREMENT keys
to select a clear memory location between 31 and
3. Press the STORE key.
The edited program has now been stored in the selected
user memory location. The stored program may now
be recalled at any time by following the normal program
NOTE: If you attempt to store a program in one of
the read-only preset locations (1 through 30),
the SPX90 will display the "# 1 ~ # 30 READ
ONLY" error message.
: SPX90 has an Edit Title Function, so you can
which allows you to provide your own titles for
edited programs. (See the UTILITY function on