Table of Contents
Advertisement
Figure 4 Installing Access Point to 15/16" Ceiling Rail
Figure 5 Installing Access Point to 9/16" Ceiling Rail
Installing AP to Solid Surface
To install an access point to a solid surface, such as a wall or hard ceiling, follow these steps:
1. Use the mount bracket as a template to mark two mounting hole positions on the wall.
2. Drill holes at the two marked positions and install the wall anchors as per the installation
instructions provided with the wall anchors.
3. Align the screw holes on the mount bracket with the corresponding wall anchors.
HPE Networking Instant On Access Point AP21 |
10
Advertisement
Table of Contents
