Setup Parameters; Setting Date And Time - KERN YKB-01N User Manual

10 Setup parameters

The printer has a setup menu. Parameter status and the list of their functions can be
printed, including:
• communication parameters (speed, parity etc.),
• CR or CR+LF,
• character size,
• character settings (Character Set)
• contrast,

11 Setting date and time

Switch the printer on.
When the printer is ready, press and hold the right button and then press and hold the
left button. Release the button right after printing is started.
"Press right to change date or left to valid" message will be printed. This means that the
setting is changed with the right button, and the entered setting is confirmed with the left
one.
For this reason, to change date and time, press the right button first.
"Press right to change Year or left to valid" message will be printed.
Date is being set starting from the year:
The last set year will be displayed:
Press the right button. "Press right to change decade and left to valid" message will be
printed.
Press the right button the number of times required to set the
correct decade. Confirm the setting by pressing the left button.
"Press right to change unit and left to valid" message will be
printed.
This is where the year is set. Press the right button the number of
times required to print the current year and confirm by pressing
the left button.
"Press right to change Month or left to valid" message will be
printed.
This is when the month is set.
Press the right button the number of times required to print the
current month and confirm by pressing the left button.
TYKB-01-A-BA-e-2310
36 2036
(example)
46
(example)
47
(example)
11
(example)
7