Cancel Button; Tcp/Ip Settings - Yamaha DME-N Installation Manual

6 Detected Device List
This list shows all detected devices. No devices will be displayed initially.
[Add] Checkbox
Checked devices will be added to the Target Device List when the [Add to Device List] button (below) is
clicked. Devices that are already registered cannot be checked.
Device IP Address
The IP address of the corresponding detected device.
Device Name
If a name has been registered for the detected device it will be displayed here, otherwise no name will be
displayed.
Device MAC Address
The MAC address of the corresponding detected device.
7 [Add to Device List] Button
Devices with checked [Add] checkboxes will be added to the Target Device List when this button is clicked.
8 [Cancel] Button
Closes the window without making any changes.
9 [Import Setup from File] Button
When working in a different environment it is possible to load a previously saved setup file. Click to open the
"Opens an existing file" window.
Select a setup file and then click the [Open] button to import the corresponding settings.
) [Export Setup to File] Button
It is possible to save the setup data to a file that can then be reloaded when working in a different environment.
Click to open the "Saves the current file with a new file" window.
Enter a file name and click the [Save] button to save the setup file.
Windows XP SP2
Select [Start] → [Control Panel].
1
The "Control Panel" is displayed.
2
If the "Control Panel" is in Category display, click [Switch to Classic View].
Double-click [Network Connections] → [Local Area Connection].
3
The "Local Area Connection Status" dialog box will be displayed.
4
Click [Properties] on the [General] tab.
The "Local Area Connection Properties" dialog box will be displayed.
5
Select [Internet Protocol (TCP/IP)] on the [General] tab, then click [Properties].
The "Internet Protocol (TCP/IP) Properties" dialog box will be displayed.
DME-N Network Driver Installation Guide for LS9

TCP/IP Settings

8