Yamaha DME-N Installation Manual page 5

2
Set up the driver parameters via the "DME-N Network Driver" window.
1
2
n
In order to use the YAMAHA DME-N Network Driver, all computer network devices (switching hubs, routers, etc.) must be
properly connected and configured. When you connect the computer to the LS9 directly without network devices, you can use
either a crossover or straight cable.
1 Target Device List
The name, IP address, MAC address, and MIDI port number of all devices registered to communicate with the
YAMAHA DME-N Network Driver are shown in this list. Click the title bars to sort accordingly.
When a device is selected in the list, information related to that device will appear in the device information
area (2) below the list.
Device Name
This column lists the names of devices registered to communicate with the YAMAHA DME-N Network
driver. When a device is selected in the list it's name also appears in the Device Name" field in the device
information area (2) below the list.
Device IP Address
The IP number of the corresponding device. When a device is selected in the list it's IP number also
appears in the Device IP Number field in the device information area (2) below the list.
Device MAC Address
The MAC address of the corresponding device. When a device is selected in the list it's MAC address
also appears in the Device MAC Address field in the device information area (2) below the list.
Device Port No.
The MIDI port number of the corresponding device. When a device is selected in the list it's MIDI port
number also appears in the Device Port No. field in the device information area (2) below the list.
[New] Button
Click this button to add a new device to the list. Edit the device's parameters as required via the fields in
the device information area (2) below the list, then click the [APPLY] button to add the specified device.
[Duplicate] Button
This button adds a device to the list by copying the data from the currently selected device. Edit the new
device's parameters as required via the fields in the device information area (2) below the list, then click
the [APPLY] button to add the specified device.
DME-N Network Driver Installation Guide for LS9
3
5