Yamaha DME-N Installation Manual page 10

Windows 2000
1 Select [Start] → [Settings] → [Control Panel] → [Network and Dial-Up Connections] → [Local Area
Connection].
The "Local Area Connection Status" dialog box will be displayed.
2
Click [Properties] on the [General] tab.
The "Local Area Connection Properties" dialog box will be displayed.
3
Click [Internet Protocol (TCP/IP)] on the [General] tab, then click [Properties].
The "Internet Protocol (TCP/IP) Properties" dialog box will be displayed.
4
Click [Advanced...], then [Properties] on the [Options] tab.
The "TCP/IP Filtering" dialog will be displayed.
5
Select "Permit All" for TCP Ports, then click [OK].
The display returns to the "Advanced TCP/IP Settings" dialog. Click [OK] to return to the "Internet Protocol
(TCP/IP) Properties" dialog.
6
Click [Use the following IP address] on the [General] tab.
7
Enter your computer's IP address into [IP address], the Gateway's IP address into [Default gateway],
and "255.255.255.0" into [Subnet mask].
n
When installing on the same subnet as the DME unit(s), set the gateway's host address to 254.
8
Click [OK].
9
Restart your computer.
DME-N Network Driver Installation Guide for LS9
10