Yamaha DG-Stomp Owner's Manual page 7

Amp Section
u
u Amp Select Switch (LEAD1-CLEAN2)
Selects one of the eight preset guitar amplifier types.
In the Utility Mode it is used to select functions you
want to set such as Foot Switch or MIDI functions,
etc.
i Gain Contol (GAIN)
Adjusts the amount of distortion.
* No sound will be produced if this knob is set to "0", even if
o
the Master Volume level is increased.
o Master Volume (MASTER)
Sets the absolute volume of the tone wet with the
Gain Volume and Tone Controls.
* The MASTER knob's setting is saved in memory.
Effect Section
(Refer to: "Effect Functions and Parameters" on page 19)
!3 Compressor Button (COMP)
Switches the Compressor ON (lamp lit)/OFF (lamp
off).
i o
!3 !5
!4 !6 !7 !9
!0
!0 Tone Controls
(TREBLE, MIDDLE, BASS, PRESENCE)
Controls the sound level of each tone.
!1 Output Level Control (OUTPUT)
Controls the level of the signal delivered from the
DG-Stomp's output jacks (OUTPUT, PHONES)
* The OUTPUT knob's setting is not saved in the memory.
!2 Speaker Simulator Button (SP. SIM)
Switches the Speaker Simulator ON (lamp lit)/OFF
(lamp off).
Press the [SP. SIM] and [UTILITY] buttons simulta-
neously to select the simulator type. (
!8 @2
@0 @1 @3
!4 Compressor Knob (COMP)
Adjusts the depth of the compressor's effect.
Turn to the right to increase the depth of the effect.
Nomenclature
!2
!1
page 14)
7