Midi Functions - Yamaha DG-Stomp Owner's Manual

Utility Mode

MIDI Functions

Press the [UTILITY] button and set the Amp Select
switch to LEAD2 ("
Create a MIDI Program Change Receive Table
Sets the corresponding patch that will be recalled
when a MIDI Program Change No. (referred to as
PRG No. from here on) is received.
Press the [COMP] button to set the receiving MIDI
PRG No. Use the [UP]/[DOWN] buttons to select
the number.
1 128
• - : MIDI Program Change No.
Press the [CHORUS] button to set the DG-Stomp's
patch number. Just as in selecting a patch in the
Play Mode, use the [UP]/[DOWN] buttons or the
footswitch.
011 933
• - ,
The patch number to be recalled.
Create a MIDI Program Change Transmit Table
When a footswitch (1-3) is pressed to recall a patch
a MIDI Program Change Number can be transmit-
ted from the DG-Stomp's MIDI OUT jack to a con-
trol an external effector, etc. from the DG-Stomp.
Assigns to the patch, a MIDI PRG No. that will be
transmitted when the patch is recalled.
Press the [FLANGER] button to set the DG-Stomp's
patch number. Just as in selecting a patch in the
Play Mode, use the [UP]/[DOWN] buttons or the
footswitch.
011 933
• - ,
The patch number to be recalled.
Press the [PHASER] button to set the MIDI PRG
No. to be transmitted. Use the [UP]/[DOWN] but-
tons to select the number.
1 128
• - : MIDI Program Change No.
Set the MIDI Receive Channel
Sets the DG-Stomp's MIDI Receive Channel.
The MIDI channel set in this step is also used as
the device number for the bulk receive function.
Press the [ROTARY] button and use the [UP]/
[DOWN] buttons to set the MIDI receive channel.
oFF
• : MIDI messages are not received
ALL
• : MIDI messages from all channels are
received
1 16
• - : MIDI channel over which messages are
received.
24
mmd
" will appear).
0 . 1 1 9 . 3 3
- :
0 . 1 1 9 . 3 3
- :
Set the MIDI Transmit Channel
Sets the DG-Stomp's MIDI Transmit Channel.
The MIDI channel set in this step is also used as
the device number for the bulk out function.
Press the [TREMOLO] button and use the [UP]/
[DOWN] buttons to set the MIDI transmit channel.
1 16
• - : MIDI channel over which messages are
transmitted.
ON/OFF Setting for MIDI Merge
Sets whether or not the MIDI signal that is received
via the DG-Stomp's MIDI IN jack will also be retrans-
mitted via the MIDI OUT jack.
Press the [DELAY] button and use the [UP]/[DOWN]
buttons to set the merge setting.
on
• : Data is retransmitted via the MIDI OUT
jack
oFF
• : Data is not retransmitted via the MIDI
OUT jack
* When the merge is on, data retransmitted via the MIDI OUT
jack is not confined to the MIDI Receive Channel setting so
all data from all channels will be transmitted.
MIDI Bulk Out
This operation transmits data stored in the DG-
Stomp's USER AREA as well as Utility Mode set-
tings to an external device, such as the YAMAHA
MDF3, etc., for back up or storage.
Use a MIDI cable to connect the DG-Stomp's MIDI
OUT jack to the MIDI IN jack of an external MIDI
device.
MIDI
OUT
To send all USER AREA data (
Utility settings with the Bulk Out operation.
Press the [TAPE ECHO] button ("
on the display), then press the [STORE] button to
carry out the MIDI Bulk Out.
MIDI
IN
MDF3, etc.
011 933
- ) plus
ALL
" will appear