Nomenclature; Top Panel - Yamaha DG-Stomp Owner's Manual

Nomenclature

Top Panel

Display & Main Section
Display & Main Section
q
w
q Up Button (UP)
w Down Button (DOWN)
Press to change the Patch Number by +1/-1. Hold
to change the Group Number by +1/-1. Simulta-
neously press the [UP] and [DOWN] buttons to
switch between the USER
Also, their flashing lamps are used to indicate the
relationship between the patch data value and the
knob's position.
6
Effect Section
Foot Switch Section
e
r
t
y
PRESET Areas.
e Manual Button (MANUAL)
Independent of the selected patch's settings, this
button changes the sound to the settings of the
knob's current position.
The lamp will flash if the patch setting is changed.
Press the [MANUAL] and [UTILITY] buttons simul-
taneously to enter the External Control Setting Mode.
( page 21)
r Utility Button (UTILITY)
Enters the Utility Mode. (
[UTILITY] and [STORE] buttons simultaneously to
enter the Tuner Mode. (
t Store Button (STORE)
Enters the Store Mode. (
y Display
Displays memory numbers, parameter setting val-
ues, etc.
Amp Section
page 23) Press the
page 22)
page 17)