Table of Contents
Advertisement
OPERATION
■ Guide the tool at a walking pace down lanes that are as straight as possible. To ensure
uninterrupted scarifying/dethatching the individual lanes should always overlap by 2 to 3 inches.
Dwelling too long at the same place while the tool is running can damage the lawn.
■ To ensure that the extension cable is not an impediment, turn the tool in such a manner that the
cable strain release on the bar always faces the side that has been treated.
■ After work and to transport the tool, disconnect the power plug and wait until the cylinder is standing still.
■ Adjust the position to the transport position (0 setting) (see Setting the Working Position) when
transporting the tool .
■ Lift the tool to transport it oversteps and sensitive surfaces (e.g., tiles).
■ Always clean the tool after each use (see Maintenance).
■ After having treated lawns with dense moss growth, it is advisable to reseed the lawn so that it can
regenerate itself more quickly.
20
Advertisement
Table of Contents
