LawnMaster GV1212B Operator's Manual page 13

ASSEMBLY
WARNING
Never operate the tool without the proper safety devices in place and working. Never operate the tool
with damaged safety devices. Failure to heed this warning can result in serious personal injury.
ASSEMBLING THE HANDLE (See Figs. 1-6)
■ Insert the two lower handles into the motor cover and secure them with two screws (Fig. 1 & 2).
■ Secure the middle handle to the lower handle with two carriage bolts and two wing nuts (Fig. 3).
■ Place the cord retainer on upper handle. Secure the upper handle to the middle handles with two
carriage bolts and two wing nuts (Fig. 4).
■ Use the two cable clips to attach the power cord to the handles (Fig. 5).
During assembly, ensure that the power cable is not squeezed and that it has sufficient play.
Fig. 1
Lower Handle
Fig. 4
Wing Nut
Carriage Bolt
Fig. 2
Screw
Fig. 5
Cable Clips
13
Fig. 3
Carriage Bolt
Wing Nut