Installing The Wall Bracket; Cleaning; Technical Data - Becker Centronic SunWindControl SWC745-II Assembly And Operating Instructions Manual

Installing the wall bracket

Wall bracket
Wall bracket
mounting
plate
Only clean the device with a suitable cloth. Do not use aggressive cleaning
agents that may damage the surface.
Rated voltage
Battery type
Degree of protection
Permissible ambient temperature
Maximum emitted transmission output
Radio frequency
The maximum transmitter range on and in the building is up to 25 m, and up to
350 m in the open.
54 - en
Unlocking mechanism

Cleaning

Technical data

• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
• Fix the bracket to the wall with
the two screws enclosed.
3 V DC
LR03 (AAA)
IP 20
-10°C to +55°C
≤ 25 mW
868.3 MHz