Troubleshooting - Midea MDF18A1AWW User Manual

TROUBLESHOOTING

Before calling for service, review this list. It may save you both time and
expense.
This list includes common experiences that are not the result of defective
workmanship or material in your dishwasher.
PROBLEM POSSIBLE CAUSE
●
Dishwasher
Dishwasher won't start.
●
won't start Power supply or power
line is not connected.
●
Delay Start option has
been selected.
●
Child Lock activated.
(selected models)
●
Dishwasher The wash cycle will beep
to indicate the end of the
beeps at the
cycle.
end of the
cycle
●
Dishwasher
The dishwasher is
operates too connected to cold water.
●
The cycle time will vary
long
due to the soil.
●
The sanitize option is
selected.
●
Dishes are not Water pressure is
temporarily low.
clean enough
The inlet water
temperature is low.
●
Dishes are loaded too
close together.
Improper use of
detergent.
●
The selected cycle is
not suitable for food soil
condition.
●
Spay arms is blocked by
some items.
SOLUTION
●
Shut the door completely
make sure it is latched.
●
Check and connect the
power supply.
●
Refer to Delay Start section
in this manual to reset.
●
Deactivate the child lock,
refer to Child lock section in
this manual.
●
Check the dishwasher, make
sure it is properly connected
to the hot water supply.
●
When heavy soil is detected,
the auto, normal, pots &
pan cycle will automatically
increase the cycle time.
●
When sanitize option is
selected, the cycle time
will be increase to meet
the sanitized temperature
request.
●
Use you dishwasher when
the water pressure is normal.
●
Make sure the dishwasher is
connected to the hot water
supply. Try not use your
dishwasher when hot water
is being used elsewhere in
the house.
●
Load the dishes again as the
manual.
●
Add detergent depending on
the water hardness and the
cycle you chose. Use fresh
detergent.
●
Choose anther cycle for
longer washing time.
●
Make sure the spay arm is
rotated freely.
25