Troubleshooting - Midea MDF24P1BST User Manual

Prepare for Use:
1.
Reconnect the water, drain and electrical power supply.
2.
Turn on water and electrical power supply.
3. Fill detergent cup and run the dishwasher through a heated wash
cycle.
4. Check the connections for leaks.

TROUBLESHOOTING

DISHWASHER NOT OPERATING PROPERLY
PROBLEM POSSIBLE CAUSE
Dishwasher There is no power to the
does not
dishwasher.
run or stops
The door is not closed
during a cycle
tightly and latched.
Most cycles pause for
5 minutes near the start
of a cycle to let the dishes
soak.
Certain cycles repeatedly
pause for 15 to 65 seconds
during the main wash.
The Delay feature is
selected.
Control Lock feature is
Dishwasher
does not start activated.
a cycle
Dishwasher
The water shutoff valve is
will not fill not turned on.
The door is not closed
tightly and latched.
Water pressure is too low.
SOLUTION
Replace fuse or reset
circuit breaker.
Close and latch the door.
This is normal, and reduces
the energy required to
clean the dishes.
This is normal.
To reset, see "Options" in
the Controls section.
Deactivate Control Lock.
See "Additional Features"
in the Controls section.
Turn on the water valve.
Close and latch the door.
Verify a minimum of
20 psi water pressure is
maintained during the
filling operation.
31