Table of Contents
Advertisement
OPERATING REQUIREMENTS
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
●
Electrically ground dishwasher.
●
Connect ground wire to green ground connector in terminal box.
●
Do not use an extension cord.
●
Failure to follow these instructions can result in death, fire, or
electrical shock.
This dishwasher is designed for operation on an adequately wired
individual 120 V, 60 Hz, 15- or 20-amp fused electrical supply with copper
wire only. It is recommended that a time-delay fuse or circuit breaker is
used, and that a separate circuit serving only this appliance is provided. If
an outlet is used, the outlet should be placed in adjacent cabinet.
LOCATION REQUIREMENTS
●
Install where dishwasher is protected from the elements. Protect
against freezing to avoid possible rupture of fill valve. Such ruptures
are not covered by the warranty.
●
Install and level dishwasher on a floor that will hold the weight and in
an area suitable for its size and use.
WATER SUPPLY REQUIREMENTS
●
The water supply temperature should be 120°F to 150°F (49°C to
66°C).
●
The water supply must maintain water pressure between 20 and 80
psi for sufficient flow.
7
Advertisement
Table of Contents
